Search in Category
Filter Your Search
Bolt Diameter
Insert Type
SHOP BY CATEGORY
Coil Inserts
.jpg)
With its simple design and fabrication, the ALP™ Straight Loop Coil Insert is highly efficient for use as a bolted connection. Available in 1/2”, 3/4”, and 1" bolt diameters. Available in plated finish.
The Expanded Coil, Ferrule Insert is a high-strength, highly versatile insert available for numerous precast concrete applications. It is available in 3/4”, 1”, 1-1/4” and 1-1/2” bolt diameters. The insert is constructed with a NC threaded ferrule, shaped struts (two, four or six depending on model) and an expanded wire coil. This efficient design increases the shear cone surface area thus increasing the load capacity of the insert.
CI-63 Flared Thin Slab Coil Insert
The ALP™ Flared Thin Slab Coil Insert is used where panel thickness is limited and offers better tension loads than
other thin slab inserts. Available in plated finish. Available in 1/2”, 3/4” and 1” Bolt Diameter.
CI-53 Thin Slab Coil Insert
The ALP™ CI-53 Thin Slab Coil Insert is designed for lifting and handling thin precast. Inserts should have 3/4” minimum clearance of the bottom face to obtain the rated loads. Available in 3/4” and 1” Bolt Diameters.
CI-18 Flared Loop Coil Insert
CI-1 Standard Slab Coil Insert
The CI-1, Standard Slab Coil Insert is designed for lifting and handling of precast slabs and is commonly used in precast roadway slabs. The CI-1 insert is designed with plastic tipped feet, to allow the insert to sit directly on the bottom of a form, without rusting on the surface of the concrete.
Insert is available in plated finish. Standard inserts not designed for use with hot dip galvanized bolts.
UOM : EA
UOM : EA
UOM : EA
UOM : EA
UOM : EA
UOM : EA
UOM : EA
UOM : EA
