Search in Category
Filter Your Search
Length
Tonnage
SHOP BY CATEGORY
LIfting Pin Eye Anchors
Need Technical Support?Email: tech@alpsupply.com
.jpg)
The Lifting Pin Eye Anchor utilizes rebar reinforcement which transfers tension loads deep into the concrete element and produces high safe working loads in thin wall sections.
Standard Finish is Hot-Dipped Galvanized.
LIFTING PIN EYE ANCHOR
DIMENSIONS AND CAPACITIES WITH REBAR
DIMENSIONS AND CAPACITIES WITH REBAR
Anchor Capacity in Concrete 4:1 SWL in tension at 2,000 PSI
| Part Number | Ton | L Length | HD - Head Diameter | RD - Rod Diameter | FW Foot Width | Anchor Ultimate Mechanical Load in Tension (lbs) | Weight Per Piece (lbs) | Min. Wall Thickness | Min. Corner Distance | Min. Anchor Spacing | Tension w/rebar (lbs) | |
| LPEA1TG | 1T | 2-9/16” | 3/4” | 3/8" | 1-5/16” | 8,000 | 0.18 | 3" | 8" | 16" | 2,000 | |
| LPEA2TG | 2T | 3-1/2” | 1-1/32" | 9/16" | 1-5/16” | 16,000 | 0.38 | 3" | 4" | 8" | 4,000 | |
| LPEA4TG | 4T | 4-3/4” | 1-7/16" | 3/4" | 1-11/16” | 32,000 | 0.97 | 4" | 5" | 10" | 8,000 | |
| LPEA8TG | 8T | 7-1/16” | 1-7/8" | 1-1/8" | 2-3/8” | 64,000 | 2.75 | 5" | 7" | 14" | 16,000 | |
| LPEA20TG | 20T | 9-7/8” | 2-3/4" | 1-9/16" | 3-5/16” | 160,000 | 7.25 | 6-1/2" | 8-1/2" | 17" | 40,000 |
- Safe work loads are based on Anchors with tension bar installed.
- Above capacities are based on ACI 318-14 requirements and mechanical testing.
- Anchors must be centered in wall thickness when installed, otherwise deviations will result in a reduction of safe working loads.
Lifting and Handling Lifting Pin Anchor System Lifting Pin Eye Anchors
Viewing Page 1 of 1
(5 results)
Results Per Page:
In Stock
UOM : EA
UOM : EA
$0.98
Qty:
In Stock
UOM : EA
UOM : EA
$1.49
Qty:
In Stock
UOM : EA
UOM : EA
$3.16
Qty:
In Stock
UOM : EA
UOM : EA
$8.87
Qty:
In Stock
UOM : EA
UOM : EA
$18.46
Qty:
